Customization: | Available |
---|---|
Specification: | 50, 70 |
Trademark: | Wombat |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
We provide customers with high-quality technical services, and establish technical support systems such as design consultation, optimal process selection and after-sales service. Apricus is committed to continuously providing MBR products that are innovative and meet different needs, providing domestic and foreign customers with cost-effective, reliable and sustainable MBR technologies and solutions for your needs.
Membrane material | PES | PVDF | PAN | |
Model | Inside-out | Outside-in | Outside-in | Inside-out |
ID/OD(mm) | 1.0/1.6 | 0.7/1.3 | 0.7/1.3 | 1.4/2.2 |
Max. Feed turbidity | <50NTU | <100NTU | <80NTU | |
Max.Clorine resistance | Continuously 50ppm; Instantaneously 500ppm |
Continuously 200ppm; Instantaneously 2000ppm |
Continuously 5ppm; Instantaneously 100ppm |
|
Operation model | Cross flow or dead-end | |||
Max. permeate flux | 120L/m2/h | 150L/m2/h | 150L/m2/h | |
Backwash flux | 100-360L/m32/h |
1. Each filament is sequentially arranged to reduce pollutant deposition;
2. Preassemble module for easy installation;
3. Hydrophilic membrane surface, higly steady flux;
4. Can be customized to different sizes so as to suit a variety of applications.
Other Specifications
Support/membranes material:Al2O3/TIO2 Operating temeperature<15ºC Operating maximum pressure:10 bars PH operating range:0-14
Membrane treatment in oilfileld conventional water flooding produced water
Conventional water-flooding technology is widely used in onshore oilfields and offshore oilfileds in China. For low permeability ad ultra-low permeability erservoirs, water injection quality directly afftects the development effect of the oildfield. The ceramic membrane technology is used to finely treat the water flooding wastewater, and water quality off the effluent reaches Grade A standard.
Membrane treatment in oilfield Polycondensation/ASP flooding produced water
Due to the fact that the polycondensate sewage is very complex, with the characteristics of large viscosity, high degree of emulsification, complex composition, and difficult biodegradation, the tradtional process can not meet the demand of oilfield production. The oild and suspended particles of polycondensate sewage are removed to achieve the requirement of water injection in low permeability oilfiled when using pretreatment and intergration ceramic membrane porocess.
Why choose Apricus?
1.We are usually pre-assembled for maximum cost effectiveness and deliver in the form of sub-assemblies on site.
2.We can supervise the installation, start-up and commissioning the system.
3.Our experts are highly trained and experienced, their average service life is more than 10 years and they are confident in processes and systems.
4.Our personnel can also provide practical training for plant operators.
Company Overview